At present, the degree of attention paid to product packaging in the market has reached a very high level. At present, all products are inevitably packaged reasonably. Relatively speaking, the requirements for the packaging industry are getting higher and higher, and the paper pipette machinery is also In constant development.
    This article will mainly explain to you some of the operating specifications of the paper pipette machine during the operation process. I hope that after reading it, you can operate it properly in the future to ensure safe and stable operation.
    I. Dressed correctly
    When operating on a paper pipette machine, the operator's requirement is that it must be properly worn, that is, it must be worn when it is worn. It must be removed before operating the machine.
    The second is mainly the two parts of the headgear and gloves. The headgear must be worn by the operator when operating the paper suction tube machine. Otherwise, if it is seen by some operators with too long hair, the hair may be slightly inadvertently twisted during the operation of the equipment, resulting in a dangerous situation.
    In the case of gloves, contrary to the hood, it is strictly forbidden for the operator to wear it, because once the gloves are carried, the gloves may be twisted into the machine during the operation, causing the hand to be wounded.
Paper pipette machinery
    2. Boot check
    The paper pipette machine must be strictly inspected according to the regulations before operation, that is, the fasteners on the mechanical equipment are confirmed one by one, and some fasteners that are loosened due to the previous vibration condition are re-fastened. Then, after confirming the normal situation, let the equipment run for about 2 minutes, and if there is no fault, the equipment can be put into normal use.
    Three. Fault conditions
    If the paper pipette machine finds that the equipment has a fault condition during the operation, it must stop the equipment immediately. Remember that the equipment cannot be operated with faults and cannot be used. It is very prone to some dangerous situations. After the equipment has stopped running, we can adjust the equipment. Of course, we can't use the hand to make adjustments. Instead, we need to use some tools to clean some internal impurities, some parts are reinforced, or some parts are present. If the damage is broken, we need to carry out the replacement process in time.
Paper pipette machinery
    Equipment management
    Paper pipette machinery must be staffed by specially equipped personnel. Others are strictly prohibited from operating or misappropriating the equipment. In addition, in the process of running the equipment, the staff can not leave the post, observe the operation of the equipment, ensure that the equipment is in a stable and normal work, or leave it privately. If there is any problem, the unintended situation will have very serious consequences. After the equipment is finished, the power of the equipment needs to be turned off, then the workpiece and the tool are taken out one by one, and after being placed neatly, the inside and the surrounding environment of the equipment are properly cleaned.
    Of course, the most important thing is that the mechanical safety device equipped inside the paper pipette machine must be used correctly according to the regulations. No one can remove it in order to save time and greed.
    These are the four rules for the mechanical operation of paper straws. I hope that you will be able to pay attention to the future when using this equipment, to ensure the safety and property safety of the equipment, and to maintain efficient and stable operation.

On a message：Paper straw equipment must be innovative and development      Next information：Paper pipette machine is efficient and reliable