After the long-term use of the automatic paper tube cutting machine, there will always be some wear and pollution, which will lead to the performance degradation of this product, so the surface is out of the importance of maintenance work, but many customers do not know the correct maintenance method. Then this article will introduce you:
1. Open the automatic paper tube cutting machine to remove all the rust inhibitors, rust and other materials applied on all internal parts, and then clean all the parts once and then use the equipment to blow them quickly. Dry and reinstall.
2. After cleaning all the parts inside the automatic paper tube cutting machine, it is lubricated. The lubricating oil added inside the automatic paper tube cutting machine is not free to add. It is best to use the automatic paper tube cutting machine manufacturer. The lubricant is added, if you want to add your own lubricant, you must have tested it to make sure there are no problems before adding it.
Before adding the lubricating oil to the automatic paper tube cutting machine, it needs to be filtered once. The amount of lubricating oil added can reach the position specified by the manufacturer and then run the moving parts once again to fill all the lubricating parts.
The above is the way to maintain the automatic paper tube cutting machine. This product can be improved and cleaned to improve the performance of the equipment, and good maintenance can also reduce the probability of failure. It can be seen that the maintenance of any equipment is indispensable.

On a message：Automatic paper tube cutting machine for simple operation      Next information：Paper pipette working principle